This is a series of plates in different thickness and density made from a 3D honeycomb fabric.
We have used this fabric for about 3 years now with great success on quite a few projects.
The 3D fabric is woven in honeycomb pattern. The 2 mm thickness is given by a glass micro sphere structure embedded in the waving and enzymed in position.
The fabric has got some specific advantages compared to Aramid honeycomb and Airex.
1. It is respectively 2 time and 4 times cheaper to process.
2. It bends better than both core materials above.\ and thus complies easily in molds
3. It has a higher absolute tensile strength than above core materials if used with the same fabric
The cons is mostly that it is respectively 20% and 50% heavier than Airex/ Honeycomb ( impregnated product ).
The plates are:
2.5 mm 6/2/6 plate at 2 kgs/ sq.m ( 6 oz/ sq.yd carbon/ 2 mm core/ 6 oz/ sq.yd carbon )
5 mm 200/2/200/2/200 plate at 3.4 kgs/ sq.m ( 6 oz/ sq.yd carbon/ 2 mm core/ 6 oz/ sq.yd carbon/ 2 mm core/ 6 oz/ sq.yd carbon )
2.5 mm 100/2/100 plate at 1.6 kgs/ sq.m ( 3 oz/ sq.yd carbon/ 2 mm core/ 3 oz/ sq.yd carbon )
5 mm 100/2/100/2/100 plate at 2.8 kgs/ sq.m ( 3 oz/ sq.yd carbon/ 2 mm core/ 3 oz/ sq.yd carbon/ 2 mm core/ 3 oz/ sq.yd carbon )
The plates are infused from our aero grade epoxy and carbon fabric.
One face is covered with peel ply for superior bonding capacity. Here is the 200/2/200/2/200 plate:
The 200/2/200 plate: